Showing posts with label Optoma. Show all posts
Showing posts with label Optoma. Show all posts

Monday, August 18, 2008

Optoma HD81-LV


By Kevin Miller
Price as reviewed $6,524

The competition among higher-end front projectors has hit fever pitch recently, partly because DLP has finally caught up to LCD and LCoS in delivering 1080p native resolution. Enter Optoma's flagship 1080p resolution DLP projector, the HD81-LV. This is one of the many projectors that actually deliver every line of resolution in a 1080p source. On the downside, we've found that its best picture quality can only be achieved in smaller screen sizes, and furthermore it was quite difficult to set up correctly. If properly calibrated, however, the Optoma HD81-LV is capable of good overall performance, and its relatively low street price compared with other 1080p units makes up for some of its faults.

Design

The design of the HD81-LV itself is rather basic. It does have a small footprint, which means it will hide away on most ceilings without bringing any attention to itself. Our review sample was finished in a gun-metal with sparkles on the top of the chassis, while the rest of the unit was a solid dark gray. Following in the vein of the ultra-high end, the HD81-LV is packaged with an outboard video processor that acts as a video source selector as well. It has an all-black finish, with the exception of a small amount of silver trim out by the sides of the unit. The HD81-LV projector measures 411 x 311 x 116mm and weighs 4.5kg, while the outboard processor measures 433 x 285 x 50mm and weighs 4.2kg.

Optoma's remote control is relatively small with seemingly a zillion keys, all of which were undersized and less comfortable than we preferred. Once you hit any key, the remote becomes fully backlit, which does help with setup in a dark environment, and we appreciated the direct access keys for most of the important functions. The projector sports a vertically arrayed GUI or menu system, which is fairly easy and intuitive to navigate.

Features

As a 1080p native resolution projector, the Optoma HD81-LV can deliver every last detail from 1080i and 1080p sources. Higher native resolution is especially important in a projector because the large screen size can really show off the extra detail. Like all somewhat affordable 1080p DLP units, the HD81-LV has a single DLP chip and uses the bulb-and-color-wheel arrangement, as opposed to the megabuck three-chip DLP models and LCoS and LCD projectors.

Optoma throws in a plethora of picture-affecting features on the HD81-LV, most of which are dubious or downright harmful to picture quality. Features to avoid using or turning on include: Brilliant Color, Color Vividness, B/W extension, and Auto Gamma. One noticeably absent setup feature is vertical lens shift, an unfortunate omission for installers because it makes placement on the ceiling relative to the screen a bit easier. Vertical lens shift is found on every other DLP and LCD-based projector at or near the price point of the HD81-LV.

Useful features include three preset selectable color temperatures in addition to a fourth, User setting, that's adjustable. Picture modes include: User 1, 2, 3, and ISF Day and Night modes. There is no mention of how to create and/or access the ISF Day and Night modes in the manual. We assume, if it is like other displays, that it must be implemented by an installer via the serial control port. Ten gamma setting choices give the user way too many ways to get this wrong. We found -5 to be the best, most CRT-like gamma curve. In the System Menu, under Projector, there's an Iris setting. This gives you the choice of Auto (which we don't recommend as it changes white and black depending on the content of the picture), Off, and On, with 16 setting choices.

The HD81-LV also offers an anamorphic lens solution for ultra-wide 2.35:1 aspect screen applications. It is available as either a fixed lens solution or a motorized movable lens assembly that attaches to the projector chassis.

Connectivity on the HD81-LV is quite generous, although more elaborate than most projectors because of the external processor box. On the rear are three HDMI inputs, two component-videos, two industrial-grade RGBHV components, two S-video, two composites and a serial control port. There is a control port that connects to the beamer for communication. Unusual for a front projection system are the front panel inputs on the processor: An S-video, composite, and analog PC input are all housed beneath a flip-down door on the front.

Optoma includes a serial cable and an HDMI cable, both 2m long, to run between the box and the projector, but you'll have to supply your own cables if you want more separation between the two. The HD81-LV can also incorporate A/V receivers (with or without HDMI connectivity), so you can have the box switch video and the receiver handle audio processing properly.

Performance

The Optoma HD81-LV's picture quality had its good and bad points, but it's not among the top tier of full-HD models we've tested. Color fidelity, if the picture is adjusted correctly, can be quite good overall. Unfortunately, when the projector is asked to fill a large screen, its grayscale goes into the toilet, causing discoloration in bright scenes and blacks to brighten significantly. Therefore, we recommend that it be paired with small screens not exceeding 92 inches diagonal, depending on the screen material. The HD81-LV's lack of vertical lens shift is a negative, but diligence in the installation can make up for that.

The initial picture quality of the Optoma HD81-LV left a lot to be desired, but that's to be expected. During setup, we discovered the unfortunate truth that the HD81-LV was not capable of producing bright pictures if you want them to be accurate. Even with the Iris off and contrast toned down, grayscale tracking and gamma suffered badly, and blacks were way too bright. With the Iris all the way up to 16, blacks looked much better, but light output was unacceptably low. We settled on a compromise with the Iris set in the middle of the range at 8. This yielded a relatively linear grayscale without much color shift, and a barely acceptable 9 footlamberts of light output on a 2m wide Stewart Grayhawk RS screen.

After a thorough ISF-style calibration, we found blacks and grayscale tracking acceptable, but certainly not exceptional, compared with other 1080p projectors. On the other hand, primary colors, although by no means perfect, were more accurate than those of most of the competition. Color decoding was accurate for both SD and HD material, as long as Color Space was set to Auto.

We watched mainly Blu-rays with our Samsung BD-P1200 set to output 1080p. Chapter 2 of Casino Royale is a very bright, fast-moving scene. This scene was rendered cleanly and smoothly thanks to clean video processing, and there was plenty of snap and pop, indicating solid contrast ratio. Chapter 7, the scene at Miami airport, has a combination of bright, colorful, and dark material all in the space of a few minutes. Shadow detail in the darker parts of this scene was relatively good, especially considering the Iris was set to 8 in the middle of the range.

Another awesome transfer on Blu-ray is The Departed and Chapter 2 is a good scene for detail and color saturation. The detail on the uniforms, along with the clock and text on the test paper, looked impressive indeed on the HD81-LV. The HD81-LV is also one of the only projectors in its class to fully resolve a 1080p resolution test pattern with no loss whatsoever. Most of the competition rolls off some of the resolution, which means you don't get all the detail. This is one of the HD81-LV's strong points.

[+/-] Read moore...

Thursday, August 7, 2008

Optoma EP727




by Rich Malloy
Current Price: $689.00 - $866.86

Shhh. If you listen carefully, you can hear an entire category of low-resolution SVGA projectors going extinct. Their low-budget niche has been invaded by the amazing Optoma EP727, which boasts XGA resolution, a highly portable design, and a price tag of just $699.

Good Performance and Features for the Price

If that’s not enough, check out the full-featured remote (which includes both a laser pointer and a set of mouse pointer controls) and the relatively wide range of inputs. Not only is there a VGA-out connector for users of obsolete desktops, but there is also a choice of two VGA inputs, using the traditional VGA and the newer DVI connectors (which can be used simultaneously for quick handoffs from one presenter to another). We also like the Velcro straps on the VGA and USB cables for neat and easy stowage.

On our tests, the EP727 presented sharp images and was adequately bright for most applications (1,466 ANSI lumens versus the 2,200 advertised). The contrast ratio was a very impressive 591:1, thanks to its DLP imaging engine. However, like many DLP models, its yellows looked a bit too much like deli mustard. The projector shut down in a sprightly 18 seconds (although it was still warm to the touch) but needed a leisurely 40 seconds to warm up. Even though we had a difficult time doing it, we liked that you can shift EP727 into low-power mode, which for this unit means less noise from the cooling fan and a longer life for the lamp (3,000 hours vs. 2,000 in Bright mode), and a 12 percent decrease in brightness.

A Few Weaknesses

Sure, a couple of aspects of the EP727 could be improved. Although the remote control has an impressive set of features (including numeric keys for inputting a theft-deterring password), most of the buttons are arranged poorly and could easily confuse a nervous presenter. Likewise, the Power button on the top panel of the projector is difficult to identify. Also, the menu structure is a bit more complicated than it needs to be. Finally, the back panel has a surprising omission: an RCA-style video connector, which is usurped by the S-Video connector.

Verdict

The above are minor quibbles, however, especially for a $700 XGA projector that is sure to kill off an entire species of low-resolution budget models. Yes, there are certainly brighter projectors available, but none has the impressive combination of price and features available in the Optoma EP727.

[+/-] Read moore...

Tuesday, August 5, 2008

Optoma TX7155


by Rich Malloy
Current Price: $994.94 - $1,230.80

If you’re looking for a lightweight projector with XGA resolution, the Optoma TX7155 is a good choice. This small, black, and boxy 3.2-pound unit sports pretty impressive specs, including 2500 lumens of brightness for a reasonable $1,100.

The TX7155’s Decent Feature Set

The TX7155 can accommodate not only the traditional assortment of VGA, composite, S-Video and audio connectors but also digital video via an HDMI port. It comes with a relatively standard assortment of cables: AC, VGA, and composite video.

With a full-featured remote control, this Optoma provides not only a laser pointer but also a full set of mouse-control buttons. Unfortunately, the sheer number of buttons may confuse presenters. For example, there are two separate quartets of arrow keys, one for moving the mouse pointer and the other for navigating the on-screen menus. It’s very easy to confuse the two. Also, the Page Up/Down buttons are too small and not well labeled.

Performance


The TX7155 didn’t fare especially well on our lab tests. In its default Presentation mode, the projector registered only 1699 lumens; we had to switch the projector to its Bright mode to pump its score up to 2264 lumens. Although this score follows an industry tradition of being about 10 percent short of its advertised value, it’s still plenty bright for most typical business applications.

Thanks to this model’s DLP imaging engine, we expected a high contrast ratio but saw instead 229:1, one of the lowest scores we have seen for projectors using this technology. On our subjective tests, images were sharp and steady. The projector excelled at resolving very dark grays, but, like most DLP models, the yellow colors were dull and mustard-like. We liked this projector’s quick cooldown time of only 15 seconds. The cooling fan was not noticeably loud.

Optoma TX7155 Verdict


With a street price of $1,100, this ultraportable model includes a very generous three-year warranty that features a one-year warranty on the lamp—four times longer than most other projectors. With this factored in, the price is equivalent to that of the Dell M209X, which has similar performance. The Optoma TX7155, however, is a half-pound heavier and has a lower contrast ratio.

[+/-] Read moore...